Multi-axes special design manipulators
The multi-axes (X,Y,Z1,Z2,R1,R2,R3) motorised manipulator is designed for precision positioning of sample holders under ultra high vacuum conditions. Reasearch table can travel along the XYZ axes,...
View ArticleWobble sticks with cleaver
3-axis manipulator dedicated to cut the sample in UHV chambers. It has interchangeable knives, fixed with four screws M3 and pressed using plates. The post Wobble sticks with cleaver appeared first on...
View ArticleGoniometers
The precision, 2-axes goniometer stage is designed specifically for anti-clash and sample access. Both axes are fitted with vernier readouts of 0.1° precision. Full 360° R1 rotation in the horizontal...
View ArticleClik here to view.
2-5 axes PLD targets manipulators
The target manipulator has two axes of rotation: R1 and R2. By changing the position of R1, different targets are selected. The R2 axis has a continuous rotation around its own axis. The manipulator...
View ArticleLinear shifts
UHV transfer mechanism fabricated from a pair of flanges, connected by an edge welded bellows. The free flange moves towards the fixed flange in a controlled, precise motion whilst maintaining...
View ArticleClik here to view.
1-4 axes sputtering manipulators
Prepared to heat the substrate up to 1000°C with accuracy +/- 1°C. The station includes the substrate (standard up to 6 inch sample holder) positioner and allows precise angular position of substrate...
View ArticleXY stages
Precision, high rigidity UHV specimen translator having X and Y motions. The standard mounting flange is DN 160CF. A DN 100CF mounting flange version is also available. The stage can work in any...
View ArticleSlit unit manipulators
Single-axis manipulators for adjusting the shape of the cross-sectional area of the synchrotron beam. Horizontal and vertical shutters, positioned inside the vacuum chamber, are translated via a...
View ArticleMirror/gratings system manipulators
Multi-axes, precise manipulators determining the correct direction of the synchrotron beam. Vacuum mirror chambers are situated along the synchrotron beamline. Mirrors are located inside the chamber...
View ArticleZ chain slides
Provides short strokes of Z travel with a wide range of bellows I.D. The slide is provided through three lead screws which are synchronously driven by a drive chain. Manual operation is provided by a...
View ArticleClik here to view.
1-4 axes MBE manipulators
Prepared to heat the substrate up to 1400°C (EB heating, UHV conditions) with accuracy +/- 1°C. The station includes the substrate (standard up to 6-inch sample holder) positioner and allows precise...
View ArticleZ slides
Precise UHV specimen translator having Z motion. The travelling flange can be chosen depending on the type of accessories. The translator is suitable for vertical or horizontal mounting. The Z slides...
View ArticleClik here to view.
2-5 axes PLD targets manipulators
The target manipulator has two axes of rotation: R1 and R2. By changing the position of R1, different targets are selected. The R2 axis has a continuous rotation around its own axis. The manipulator...
View ArticleLinear shifts
UHV transfer mechanism fabricated from a pair of flanges, connected by an edge welded bellows. The free flange moves towards the fixed flange in a controlled, precise motion whilst maintaining...
View ArticleClik here to view.
1-4 axes sputtering manipulators
Prepared to heat the substrate up to 1000°C with accuracy +/- 1°C. The station includes the substrate (standard up to 6 inch sample holder) positioner and allows precise angular position of substrate...
View ArticleWobble sticks with rotating tip
Mainly used to operate in vacuum mechanisms such as shutters, adjustment probes and variable orifices. Non magnetic vacuum parts. The post Wobble sticks with rotating tip appeared first on PREVAC |...
View ArticleMulti-axes special design manipulators
The multi-axes (X,Y,Z1,Z2,R1,R2,R3) motorised manipulator is designed for precision positioning of sample holders under ultra high vacuum conditions. Reasearch table can travel along the XYZ axes,...
View ArticleWobble sticks with cleaver
3-axis manipulator dedicated to cut the sample in UHV chambers. It has interchangeable knives, fixed with four screws M3 and pressed using plates. The post Wobble sticks with cleaver appeared first on...
View ArticleClik here to view.
1-4 axes MBE manipulators
Prepared to heat the substrate up to 1400°C (EB heating, UHV conditions) with accuracy +/- 1°C. The station includes the substrate (standard up to 6-inch sample holder) positioner and allows precise...
View ArticleZ slides
Precise UHV specimen translator having Z motion. The travelling flange can be chosen depending on the type of accessories. The translator is suitable for vertical or horizontal mounting. The Z slides...
View Article